Live chat by BoldChat
Our agents are available:
9:00 AM - 6:00 PM EST
Wilcom PS-11 NID-mounted POTS Splitter
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   
Wilcom PS-11 NID-mounted POTS Splitter



Click image to enlarge

 Wilcom PS-11
Features and Benefits:

  • Compatible with ADSL coding schemes - The PS-11-I2 POTS Splitter is compatible with all ADSL coding schemes.
  • Meets ANSI T1.413 -1998 & ITU-T G.992.1/.2 - The PS-11-I2 Master POTS Splitter is compliant with the requirements of both ANSI T1.413-1998 Annex E; ITU-T G.992.1/G.992.2 Annex E.2 Type 2 (North America).
  • Passive Low Pass Filter - Passive filter design for continuous phone service in the event of an AC power failure
  • Unique Footprint - The PS-11-I2 is similar in size to a standard station protector allowing direct installation into a wide variety of manufactured Network Interface Devices.
  • Convenient Mounting - The PS-11-I2 POTS Splitter is unique because of its convenient mounting location in the Telco side of the Network Interface Device.
  • Unlimited ADSL Bandwidth - Full bandwidth allocation as compared to a "micro-filter".

Warranty:
The Wilcom PS-11-I2 POTS Splitter is warranted against failure for a period of three years if normal usage is observed.

Additional photos
Click image to enlarge

  Data sheet

  Installation instructions


  Description

Mounted in NID box by service provider. The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines.

The Wilcom PS-11-I2 POTS Splitter is unique because of its convenient mounting location inside the Network Interface Device (NID). The PS-11-I2 is similar in size to a standard station protector and mounts on the Telco side inside the Network Interface Device. The terminal strip allows for easy installation so the installer can simply connect the existing premise wiring to the PHONE terminals on the splitter, and have POTS service up and running within minutes without expensive, and time-consuming rewiring. ATU-R terminals connect directly to the ADSL equipment with existing cable. (Data-grade cabling is recommended for new installations.)


  Models, Options, & Accessories


Model Description List Price Sale Price
PS-11 WilcomPS-11 - Discontinued - no replacement
PS-11-12 ADSL Master POTS Splitter for Customer Premises (For NID box mounting) $35.00
$34.25 


  Specifications

Signature T1.413- 1998 Compliant CPE Signature
Mounting Mounts directly in Telco side of existing Network Interface Device
Safety UL - Listed to US and Canadian safety standards
Filter Parameters
Corner Frequency PS-11-I2 > 7kHz
Insertion Loss (1kHz) < 0.25dB
30kHz Attenuation > 65 dB
Attenuation Distortion (0.2kHz-3.4kHz) < 0.25dB
Delay Distortion < 50uSec
Return Loss (600 ohms + 2.16uF, typical) ERL    +27dB
SRL-LO    +18dB
SRL-HI    +20dB
DC Resistance < 20 ohms
Longitudinal Balance > 70dB
Idle Circuit Noise 0dBrnC
Power
Maximum Loop Current 100mA
Environment
Operating Temperature @(5 to 95% humidity) -40ºC to +70ºC
StorageTemperature @(5 to 95% humidity) -40ºC to +70ºC
Physical
Dimensions (HWD) 1.43" x 2.25" x .80"
( 36.32 x 57.15 x 20.32 mm )


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET