|
|
|
|
| Latchbolt operates by knob or lever inside, thumbpiece outside except when outside trim is locked by rocker switch; then opens by key outside, by knob or lever inside. Deadbolt activated only by key from either side. | |
Door Style : Single Trim Plate Type : Double Cylinder Installation Type : Tubular Style : Traditional Type of Material : Brass Collection : Manor Product Features
- For Doors: with 3 7/8" minimum stile for 2 1/2" b.s. lock. 4 3/8" minimum stile for 2 3/4" b.s. lock. 1 3/4" thick as a standard.
- Available with two backsets options: 2 1/2” or 2 3/4”. (Please specify backset on order.)
- Case: 2 1/2" b.s.: 3 5/8" x 6 1/16" x 7/8". 2 3/4" b.s.: 3 7/8" x 6 1/16" x 7/8". Heavy wrought steel with zinc dichromate finish for corrosion resistance.
- Front: Armored steel front, adjustable for beveled conditions. With 8 x 1 1/4" solid brass faceplate. Finished to match trim.
- Latchbolt: 1 x 5/8" x 3/4" full throw. Solid brass with antifriction design. US4 finish only.
- Deadbolt: 1 3/16" x 9/16" x 1" full throw. Solid brass, one-piece component with saw-proof insert. US4 finish only.
- Springs: High carbon steel.
- Strike: Solid brass curved lip strike. 4 7/8" x 1 1/4" x lip 1 1/4" to center. Finished to match trim. Dust box shipped with set.
- Hand: Fully reversible. When ordering specify right, left or reverse bevel.
- Cylinder: Solid brass from bar stock. Made in USA. Supplied with 11/8" Schlage "C" keyway as a standard, with cloverleaf cam and two brass keys. When applicable, cylinder collars are supplied with compression spring.
- Hubsize: .290" (7mm or 3/8") hub. Broached on the square position. Hub is on one side of the lock only.
|
Product Includes
- AVAILABLE FINISHES: Vintage (Brass, Copper, and Iron)
- 2 Knob Trims (1 Exterior and 1 Interior)
- 2-1/2" or 2-3/4" Backset Mortise Lock
- Cylinder, Strike, Spindle, and Dust Box
- Faceplate
- All necessary mounting screws, instructions, and templates.
|
Product Specifications
| Projection |
2-1/2 in. |
| Overall |
17-1/2 in. |
 Important Notes
- Conforms to requirements of ANSI/BHMA A156.13 Series 1000.
- Specify Backset and Handing when ordering.(SEE OPTIONS BELOW)
- PLEASE REFER TO THE FAQS LINK BELOW IMAGE TO DETERMINE HANDING.
|
|
|
|
|
|
|
