 |
|
This Item's Warranty is: |
| - |
36 Months Parts
|
| - |
Months Labor
|
|
Warranty provided by |
| - |
ThermalTake |
| - |
View Warranty Info |
|
|
|
 |
|
|
Thermaltake ProWater 850i Liquid Cooling System
Wow! That’s what our gaming expert said when he checked out Thermaltake’s new PW 850i ProWater Series (CL-W0175) liquid flow system. He knows that you’re not going to find a better cooling system than the PW 850i. and wants to make sure you grab this deal while you can. The PW 850i features a brazing copper waterblock for maximum heat conductivity from the heat source. And advanced brazing technology is leakage free. The Thermaltake PW 850i Pro Water Series’ all-in-one mounting design supports all the latest Intel and AMD processors. This liquid flow system also includes a 12cm Motorsports Radiator, durable and powerful 500 liters-per-hour pump, a high capacity liquid tank, and a flow meter for accurate monitoring and fast response. A transparent cover clearly shows the coolant’s movement. And iStrip completely eliminates the possibility of the tubes deforming over time and allows them to bend sharply while still keeping the liquid flowing smoothly. This system’s rugged 3/8" tubing are composed of a special material to prevent wear and tear while increasing water flow.
Liquid Flow System
 |
Detailed Features
Features
- Brazing Copper Waterblock:
- Pure Copper Water Block for maximum heat conductivity from heat source.
- Advanced Brazing technology improves reliability and leakage free.
- All-in-one mounting design supports all latest CPU from Intel & AMD.
(Includes: Intel Socket LGA775 and AMD K8/AM2.)
- 12cm Motorsports Radiator :
- DTT - Dimple Tube Technology swirls the coolant within the radiator to increase
thermal transfer.
- An all-aluminum radiator featuring expanded outer fins and tube style for
maximum performance.
- Silent 120mm variable resistor fan spinning from 1300 to 2400rpm
- Durable and Powerful 500 liters-per-hour pump:
- The P500 pump provides years of reliable service
- The pedestal can be secured onto the case by screws included
- Ceramic bearings significantly increase the life expectancy of the pump
- Professionally designed inlet and outlet, eliminating any blockage
- High-Capacity Liquid Tank:
- Holds up to 350cc of coolant for continuous usage
- Easy to refill and maintain
- Flow Meter:
- Accurate monitoring and fast response- Transparent cover clearly shows the
movement of the coolant.
- iStripe :
- Complete eliminates deformation of tubes over time
- Allows sharp bending radii while keeping liquid flow smoothly
- Rugged and Free-Flowing 3/8" Tubing:
- The tubes are composed of special material to prevent wear and tear as well
as increasing water-flow
A Closer Look
|
|
Latest Owner Reviews
|
| REVIEW BY: Reviewed
Nov 22, 2008 |
 |
| Easy to install does its job Never passes 50C on load and overclocked aand i also have alot of line on it so it should be fine, HIGHLY RECOMMENDED!!!! |
|
| REVIEW BY: Reviewed
Nov 19, 2008 |
 |
| I am extremly happy with this cooling system as I was able to install it in my mid-tower case with no complications, and as far as the temps go on my Nvidia 750i mobo and Intel Q9550 processor which I have OC'd to 4.00ghz with the temperature @ 43c idle and 48c gaming it's needless to say I'm quite impressed. |
|
| REVIEW BY: Hezsus Reviewed
Oct 27, 2008 |
|
| just got this installed to my Tt armor mx with a 780i mobo and 8800 ultra. It barely fit, the tempeature diference between this and my Tt golden orb fan only dropped about 5 degrese. q6600 overclocked to 3ghz and it runs about 60 degreese on max load. my fan ran at about 65, so for the performance it got a 4, but it looks wicked. good for a beginner into water cooling just make sure you have room, or put the pump or rad outside. and as everyone says. BUY EXTRA COOLANT, or use distilled water with and anti corrosion additive. and consider some 3/8-1/2'' gear clamps as the clamps supplied dont appear to do alot |
|
| REVIEW BY: Anonymous Reviewed
Oct 23, 2008 |
|
| I'm running an Asus M3A32-MVP Deluxe Motherboard with a AMD Phenom 9850 Black Edition, Radeon HD 3870 X2 GPU, and 8 Gigs RAM. My Processor temps with a Thermaltake TR2-R1 were about 50c idle and 70c gaming. After installing this my temps are around 40c idle and 48c gaming. I installed the waterblock with Arctic Silver thermal paste. The radiator was easily changed to mount outside my case, but slightly interferes with getting the side of my case on and off. The fan has a small knob to change the speed of the fan from about 1375 RPM to 2575 RPM, and even at top speed and mounted on the outside of my case the noise at full speed isn't very loud at all. Purchase more coolant with this as it comes with barely enough to run it, especially if you use lots of tubing. |
|
| REVIEW BY: Reviewed
Oct 01, 2008 |
|
| So far I really like it actually I love it Theres only problem i ran into is that the radiator is to large for my computer I had to so some modifications to get it to fit other than that its great its keeping my computer much much cooler. I had a bad problem of my computer shutting off if i did anything with higher processing like games or 3 or more internet explores even when using AutoCad from time to time. Now i can play Crysis and no problems i even opened like 15 internet explorers and worked like a charm. |
|
|
|
|
|
|
|
|
|
Limited Warranty
|
|
| This Item's Warranty is: |
| -
36 Months Parts
|
| -
Months Labor
|
|
| Warranty provided by |
| -
ThermalTake |
| -
View Warranty Info |
|
Manufactured by:
ThermalTake
Mfg Part No:
CL-W0175
UPC No:
841163026533
Box Size:
( Length:
14, Width:
9, Depth:
13 )
Shipping Weight:
7.9000 pound(s)
Limited Warranty:
36 months parts;
months labor
Click here for full warranty and support information
|
Limited Warranty: A full text version of the limited warranty
may be obtained by mailing a self addressed, stamped envelope to the
address below and requesting the warranty for item number:
T925-1269
TigerDirect.com
Warranty Information
7795 W. Flagler St. Suite 35
Miami, FL. 33144
|
|
|
|
|
|
|
|
|
0
Item Total
$0.00
