ThermalTake Big Water 760i Liquid Cooling System
To decrease manufacturing cost, traditional water blocks are often designed
with a simple water channel. However, water within the liquid cooling system travels
at very high speeds, and does not have sufficient time to absorb heat from the
heat source. To overcome this major downside, Thermaltake developed a water block
with Redundant Micro Channel Design which effectively divides water flow into micro
channels, thus accelerating heat transfer from the heat source to cooling liquid.
In addition, the micro channels are stacked on top of each other to fully utilize
the available space within the water block and further increase heat transfer.
This new technology outperforms the traditional radiators. The advanced design
utilizes dimpled tubes to create vortexes and swirls of coolant within the
radiator. Combined with the high fin density of louvered fins, the Dimpled Tube
Technology greatly enhances the performance of the radiator.
Refill
Reservoir
Transparent reservoir contains 350 c.c. of liquid capacity, easy to refill
P500
Pump
Flow rate : 500L/hr, can easily handle extra water blocks for GPU, memory,
HDD or chipsets.
Silent
VR Fan
Adjustable 120x120x25mm blue LED fan, (1600~2400RPM)
CPU
Water Block
Pure copper waterblock designed with brazing technology
Quick
Disconnect
Automatic non-spill valves, robust material one hand operation
Motorsports
Radiator
Dimple Tube Technology with louvered fin radiator greatly increases the
surface area for added cooling capability
Specifications
Fan Type:
CPU Water Block
Socket Type:
775
939
754
478
AM2
Fan Speed:
1600 ~ 2400 RPM
Noise Level:
16 dBA
Heatsink Material:
Aluminum
Bearing Type:
Ceramic Bearing
Voltage:
12 V
Connector(s):
4-Pin
Fan Dimensions:
120 x 120 x 25 mm
Heatsink Dimensions:
153 x 120 x 28 mm
Life Hours:
80,000 Hours
Detailed Features
Related Video
A Closer Look
Features
Dual 5.25 Drive Bay design: liquid cooling system in-a-box to save
the space in the chassis and simplifies installation
Mesh design front bezel enhances ventilation
Easy to install and refill.
12cm Motorsports Radiator:
DTT - Dimple Tube Technology swirls the coolant within the radiator
to increase thermal transfer.
An all-aluminum radiator featuring expanded outer fins and tube style
for maximum performance.
Slim Pure Copper Waterblock:
Micro-Channel Design within the waterblock maximize the thermal efficiency
Advanced Brazing technology improves reliability and leakage free
All-in-one mounting design supports all latest CPU from Intel &
AMD. (Includes: Intel Socket LGA775 and AMD K8/AM2.)
Ultra-low noise fan: silent variable fan with blue LED (1600 ~ 2400rpm).
High-performance Liquid Pump:
Silent and powerful P500(500L/hr) pump provide superb reliability
The ceramic bearings significantly extend the life-expectancy of the
pump.
Quick connector:
Quick Disconnect Coupling: Valves shuts off water flow immediately when
dismantling to prevents water leakage
User friendly Quick Install Connector saves you time and energy.
Durable 3/8” Tube: Special material to prevent wear & tear
from being clogged up or over bending.
Additional Specifications
2U Bay Drives
Dimension- 232mm(L) X 148.6mm(W) X 85mm(H)
Weight - 1.3(kg)
Water Block
Material - All copper designed
Dimension - 58mm(L) X 58mm(W) X 35mm(H)
Quick install connector - For 9.5mm ID (3/8”) tubing
Weight - 311(g)
Pump
Dimensions - 75(L) x 70(W) x 75(H) mm
Bearing - Ceramic bearing
Maximum Capacity - 500 L/ hr
Rated Voltage - DC 12V
Input current - 600 mA
Connector - 4 pin
Noise - 16 dBA
Life time - 80000 hr (MTBF)
Radiator
Material - Aluminum
Tube Design - Aluminum, Dimple
Fin Design - Aluminum, Louvered
Quick install connector - For 9.5mm ID (3/8”) tubing
Fan
Fan Speed - 1600~2400 RPM
Rated Voltage - 12V
Noise - 16 ~20 dB
Life Expectancy - 40,000 hr
Connector - 4pin
Liquid Tank
Dimensions - 72.4 (L) x 70.5(W) x 69.4(H) mm
Capacity - 130 c.c
Quick install connector - For 9.5mm ID(3/8”) tube
Tube
Dimensions - 9.5mm ID(3/8”) tube
Material - Green UV
Coolant
Capacity - 500 c.c
Major Material Ingredient - Ethylene Glycol
ThermalTake Big Water 760i Liquid Cooling System
Reviewed By Our Editors
Any cooler will stop a CPU from overheating. If you run a current model CPU with no cooler at all, it will overheat and possibly permanently damage the CPU; Athlons and Durons can die in seconds, and often do when someone's failed to notice that their cooler isn't clipped on right and thus doesn't actually touch the heat sink. But if you're just using an inadequate cooler, as opposed to none at all, your computer will merely be flaky. You'll be able to cure the problem by improving your case ventilation and/or upgrading to a better cooler. By using the ThermalTake Big Water 760i Liquid Cooling System yours problems are solved.
The ThermalTake 760i liquid cooling system is considered a high-end product. It has an adjustable 120 x 120 x 25 mm blue LED fan with 16000 to 24000 RPM fan speed and a noise level of 16 dBA. Additionally, the device has a Motorsports Radiator which is used to increase the surface area for its added cooling capability. It also consists of automatic non-spill and quick-disconnect valves and an easy-refill reservoir which contains 350 cc of liquid.
Speaking of design, this liquid cooling system has three main components such as pump, heat sink and expansion tank in a single block. It is mounted on an open frame, which contributes much to the ventilation of the heat sink, especially when there is not enough air to flow and thus, gives more or less comfortable access to its internal components. It also comes with a vent hole on the front panel of the block that also contributes to ventilation of the heat sink and raises efficiency of the entire system.
Another interesting feature of the Big Water 760i is its advanced heat sink. The Big Water 760i also has an interesting processor block - it's manufactured using advanced technologies to avoid any chances of leakage (brazing). It's quite compact and features a complex design with a section of narrow micro channels. It's an original solution and well though-out. We know that heat is exchanged mostly in a thin near-surface layer; there is almost no heat exchange in the core of the flow. Hence, large water blocks, often used by some manufacturers, are irrational. On the contrary, micro channels can significantly improve thermal efficiency of a water block - effective heat exchange surface area is expanded, flow speed is increased, so the heat exchange ratio also grows.
The Big Water 760i also has a good pump. Weak pumps used in older products are now a thing of the past. Nominal output of this pump is 500 L/hr. Technical quality of the pump is also very good - the new pump can compete with similar pumps popular among enthusiasts.
Retention module of the CPU block is compatible with various platforms. It can be installed on Intel LGA775 and on AMD Socket K8/AM2 and offers a rational installation procedure.
All components of the ThermalTake Big Water 760i Liquid Cooling System are of high quality. They are made to last, be it the monolithic CPU block, the pump, a heat sink of the industrial design or the tube made of good materials with special valves. Leakage is therefore out of the question in this liquid cooling system.
dropped my cpu temp from 140 F with just the computer being on to 95 F. I also purchased a flowmeter/temp probe and another pump that is the same one that is in the bigwater.
The only problem with buying this is now i have to get a new case because i just want to keep expanding my water cooling setup
REVIEW BY: Lokizz Reviewed
Nov 12, 2008
Hey Btw ive Bought This and Does it Support 780i Motherboard before i put it in??
REVIEW BY: Reviewed
Nov 05, 2008
Very easy for first time users, its a must buy. The instructions and care manual are included. This thing works great. Keeps my comp at a steady 32C-37C Load. Excellent for those who do not really know how to set these up as it will make the job a lot easier. Also looks nice in the case. A must have if you don't have a liquid cooling system already.
REVIEW BY: Cyberican Reviewed
Nov 04, 2008
Excellent Product, exceeded my expectations for performance, keeps Q6600 OC to 3.2ghz at 33-36c idle 42c gaming & 57c using OCCT 30min, with a 22c room temp, installation quite easy, unit is long, beware of room, not for mid towers with power supply close to the top. My tower is an Ultra ATX Mid; will mod it to provide better ventilation from top side to improve performance because it showed better performance with the tower face plate removed & was originally designed for a chassis with top ventilation...
REVIEW BY: Adam Reviewed
Oct 17, 2008
Was my first experience setting up a liquid cooling system, and i wasn't disappointed.
ThermalTake Big Water 760i Liquid Cooling System Kit
$149.99
Manufactured by:
ThermalTake Mfg Part No:
CL-W0121 UPC No:
841163022986 Box Size:
( Length:
22, Width:
7, Depth:
10 )
Shipping Weight:
8.4000 pound(s)
Limited Warranty:
36 months parts;
36 months labor
Click here for full warranty and support information
Limited Warranty: A full text version of the limited warranty
may be obtained by mailing a self addressed, stamped envelope to the
address below and requesting the warranty for item number:
T925-2258
TigerDirect.com Warranty Information
7795 W. Flagler St. Suite 35
Miami, FL. 33144
0
Item Total
$0.00
Fan Type:
