 |
|
This Item's Warranty is: |
| - |
12 Months Parts
|
| - |
12 Months Labor
|
|
Warranty provided by |
| - |
Sabrent |
| - |
View Warranty Info |
|
|
|
 |
|
|
 IDE Ultra ATA-100/133 to SATA Mini Converter
This Ultra ATA-133-to SATA mini converter features a standard 40 pin ATA port and can interface to a parallel
Ultra ATA (IDE) devices (hard disk, CDROM, etc). It accepts SATA commands through the Serial ATA interface from the host, decodes the commands and converts them to parallel ATA commands to the device. Response from the device through the parallel ATA bus are deciphered, processed and converted to SATA protocol and sent to the host.
This Ultra ATA-133-to-SATA Converter Board supports the Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s) on the serial side and is compatible with Ultra ATA-133 on the parallel ATA side.
All EIDE type DVD / DVD-RAM / CD-ROM / CD-RW / HDD become new serial ATA devices!
Attache this Mini Converter board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, etc.) and make them become new Serial ATA Devices and meet new Serial ATA standard.
This dangle board can support HDD larger than 137GB. The standard 40-pin ATA port can interface to a parallel Ultra ATA device. It accepts SATA commands through the Serial ATA interface from the host, decodes the commands and converts
them to parallel ATA commands to the device. Response from the device through the parallel ATA bus is deciphered, processed and converted to SATA protocol and sent to the host.
All your old DVD / DVD-RAM / CD-ROM / CD-RW / HDDs become new serial ATA devices and meet new serial ATA standard !!
 |
Detailed Features
Specifications
- Supports all types of devices:
- ATAPI
- ATA/133
- ATA/100
- ATA/66
- ATA/33
- EIDE
- IDE
- Capacity: Support HDD larger than 137GB
- Transfer rate: 1.5 Gb
- Compliance: Serial ATA 1.0 Specifications
Features
- Support Spread Spectrum in receiver
- Converts parallel ATA hard drive to Serial ATA
- Supports ATA/100 or ATA/133 IDE hard drive
- Includes Y Power Cable
|
|
Latest Owner Reviews
|
| REVIEW BY: Reviewed
Nov 20, 2008 |
 |
| Looked like it should just work.....but it didn't.
I bought 2, and used one on a CD-RW drive. After messing around for a while, I was able to see the CD-RW in the bios, when I put the CD-RW jumper on Cable Select. Any other position and the computer wouldn't boot. I never saw the drive in Windows (but maybe that's a Vista problem).
My IDE harddrive went a little better. I was able to see it intermittently in windows....long enough to get my data off it.
Sabrent tech service was and still is silent on the issue. I suggest you look for alternative solutions. |
|
| REVIEW BY: Ed Reviewed
Nov 09, 2008 |
 |
| Product came without instructions. Took me a couple hours of tinkering to figure it out. I got this to work on an IDE hard drive by putting the harddrive jumper on master and leaving the adapter jumper off. |
|
| REVIEW BY: victor Reviewed
Oct 20, 2008 |
|
| Shipped with no documentation, but I guess you shouldn't need it; a part like this either works, or it doesn't. For me it didn't. Everything plugs in the way it looks like it should, but my Intel D201GLY2-based budget system just couldn't find the HDD, no matter what I did in BIOS. I wound up buying a cheapie SATA HDD rather than re-using the old IDE drive I had kicking around. Probably should have just done that in the first place. Waste of $15.00. |
|
| REVIEW BY: Doug Reviewed
Oct 19, 2008 |
 |
| I bought this hoping to solve my IDE situation, crossed my fingers, easy install, simple connections, huh, jumper, why? Needless to say, the board didn't work,I tried every jumper possibilty still nothing, I contacted there support web site. Seven days now, still no reply from them. Maybe this unit only works on certain motherboards. But not on mine. I sent it back to Tiger and went out and bought a new serial ATA DVD burner. |
|
| REVIEW BY: RoD Reviewed
Oct 10, 2008 |
 |
| It works, is true it doesn't have instructions but i got it to work i just set the jumper the same way it is on the picture on the box |
|
|
|
|
|
|
|
|
| What You Should Know
|
|
Limited Warranty
|
|
| This Item's Warranty is: |
| -
12 Months Parts
|
| -
12 Months Labor
|
|
| Warranty provided by |
| -
Sabrent |
| -
View Warranty Info |
|
|
| Sabrent IDE Ultra 100-133 to Serial ATA to Mini Converter |
|
$14.99 |
 |
|
|
Manufactured by:
Sabrent
Mfg Part No:
SBT-SCIDE
UPC No:
188218000248
Box Size:
( Length:
9, Width:
7, Depth:
2 )
Shipping Weight:
.1000 pound(s)
Limited Warranty:
12 months parts;
12 months labor
Click here for full warranty and support information
|
Limited Warranty: A full text version of the limited warranty
may be obtained by mailing a self addressed, stamped envelope to the
address below and requesting the warranty for item number:
M501-1088
TigerDirect.com
Warranty Information
7795 W. Flagler St. Suite 35
Miami, FL. 33144
|
|
|
|
|
|
|
|
|
0
Item Total
$0.00
