Convert High Capacity SATA Hard Drive
and SATA Storage Device to operate with IDE Host Controller!
Attaches this Mini size Dangle board to the back of all types of Serial ATA
Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ….)and make
them become IDE Device to work with IDE host Controller. This Ultra ATA-To-1
Port Serial ATA Converter is the solution for converting a Serial ATA device.
It features a Serial ATA port to connect SATA devices such as hard drives, DVD-ROM,or
CD-ROM drives to a Parallel ATA interface. It supports Serial ATA tansfer rate
of up to 1.5 GB/s and supports Spread Spectrum Receiver.
This Bridge Board is a converter solution for the Serial ATA Device. It has
a standard 22 pin SATA port which can interface to a Serial ATA device (hard
disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through
the 40 pin IDE connector from the host, decodes the commands and converts them
to a Serial ATA commands to the device. Response from the device through the
SATA bus are deciphered, processed and converted to a prallel ATA protocol and
sent to the host. This Bridge board can support HDD larger than 137GB.
The SATA-to-Ultra ATA/133 Converter Board supports the Serial ATA Generation
1 transfer rate of 1.5 Gb/s (150 MB/s) on the serial ATA side and is compatible
with Ultra ATA-133 on the parallel ATA side.
Detailed Features
Specifications
Compatible with Ultra ATA 133 specifications.
Supports all types of SATA storage devices. (DVD, DVD-RAM, MO, CD-ROM, CD-RW,
Hard Disk, ...)
Complaint with Serial ATA 1.0 specifications.
Supports Serial ATA Generation 1 tranfer rate of 1.5Gb/s.
Supports Spread Spectrum in receiver.
Male/Female Y Large Molex Power connector (8-inch length)
RoHS Compliant
Features
Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard
Disk, ….)
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
Mini Board size (75mm x 26mm), No space wasted
Compliant with Serial ATA 1.0a specifications
Supports Spread Spectrum in receiver
Compliant with ATA specifications
Compatible with Ultra ATA 133 / 100 / 66 / 33
100% hardware bridge converter to support PC, MAC and Linux environment
Minimum System Requirements
100% hardware bridge converter to support PC, MAC and Linux environment
Latest Owner Reviews
3.1
3.0
3.0
2.7
REVIEW BY: Mike Reviewed
May 07, 2008
I can describe my experience with sabrent products in one word, frustrating. Nothing works, it did NOT come with any instructions, it did NOT come with the power cord adapter, I had to make my own, and even on the manufacturer's web site, it does not offer any support, instructions, etc. DO NOT EVER buy a Sabrent product unless you consider it a donation. I have been a systems engineer for over 30 years, and this product takes the cake when it comes to being completely worthless.
REVIEW BY: john Reviewed
Apr 02, 2008
My machine would have occasional problems booting up after I connected this drive. The event log confirmed some disk errors.
Its too flakey for me....
REVIEW BY: Reviewed
Mar 11, 2008
I saw these on the shelf and I figured for $32a pair, let me try them. I had a pair of Maxtor 300Gig drives I wanted to attach to a SATA Raid controller.
Documentation is pretty much non existent. The Store Manager told me to have the drive jumpers set to Master on both drives. Another review here said put the jumpers on Cable Select. It worked for me with both drives set on Master. One downside is that you need to plug the power cable into the card and also plug a power connector to the drive.
I didn't connect any optical drives or other IDE drives except 2 Maxtor 300Gig Hard Drives.
All in all, a really good value allowing you to use a new ATA drive with a SATA adapter.
REVIEW BY: bad_boy208 Reviewed
Feb 27, 2008
To start with, I have a lite-on 20x DVD/CD writer with lightscride .Well, it came today . My PC thinks it has two masters, no matter where I put the plug.
It will play movies and show pictures..Don't know about the lightscribe yet.Funny thing is it works with Inter Actual player and not Cyberlink Power DVD. As soon as I do a litte more home work on this I'll come back to add more.
REVIEW BY: Reviewed
Feb 19, 2008
It was horrible. I used it and everytime it would give me a disk read error. DON'T BUY.
Clear Your
Mind of Cable Clutter
Got a new PC, but can’t figure out how to connect all the cables? We’ve
created this handy little guide to simplify the process. Everything you
need to know about connecting your cables is right here. No more guesswork!
Now you can enjoy your system and save yourself all the headaches.
12 Easy Steps to Installing a PCI Adapter
Card
The simple task of installing a PCI adapter card into a desktop computer
takes only a few minutes. All you need to complete the job is our handy
step-by-step, photo-illustrated guide and a Philips screwdriver. Please
note that there are many PCI adapters that can be installed in your computer
system. Therefore, this brief guide only covers the physical installation
of the card itself. To install peripheral attachments you will need to consult
the installation directions that come with the adapter card.
IDE Ultra ATA-100/133 to Serial ATA (SATA) Mini Converter Adapter
Y-type Power Cable
Quick Installation guide
Contents of package may vary from those pictured and stated here,
due to changes in manufacturer's specifications or merchandising.
Please check the product information carefully, items not included
may no longer be required.
Sabrent IDE Ultra ATA-100/133 to Serial ATA (SATA) Port Mini Converter
$14.99
Manufactured by:
Sabrent Mfg Part No:
SBT-STDB UPC No:
188218000101 Box Size:
( Length:
7, Width:
9, Depth:
2 )
Shipping Weight:
.2000 pound(s)
Limited Warranty:
12 months parts;
12 months labor
Click here for full warranty and support information
Limited Warranty: A full text version of the limited warranty
may be obtained by mailing a self addressed, stamped envelope to the
address below and requesting the warranty for item number:
M501-1162
TigerDirect.com Warranty Information
7795 W. Flagler St. Suite 35
Miami, FL. 33144